Website Name - an official New Hampshire Government website
Smaller text size Reset text size Larger text size
link to website translation page
CAD/D HomeMicroStationMXOpenRoadsDownloadsSearchNHDOT Homelink to website translation page

NHAliReport Add-in

The NHAliReport program was developed by Maine DOT (originally called MDOT DAB). It creates a COGO style report of an MX alignment. Before it can be used, it must be added to your Add-in menu. This report can be used to add curve data to a MicroStation alignment by using the CurveData macro.

Select the model that contains the alignment(s) to be reported. Next select an alignment from that model and hit the Apply button. Additional alignments can be selected and added to this report. Once all alignments are selected, click the Save To File button and choose a name for the file.

nhalireport dialog box

Once the report has been saved, you can Clear the data and start a new report or hit the Cancel button to end the program.

The report generated can be used to plot alignments in MicroStation with the NHAlign macro.

See Creating a MicroStation Alignment Drawing for a description of the NHAlign macro.

To Be Aware Of

Single element alignments will not plot properly in MicroStation. Including them in this report will cause unpredictable results when the NHAlign macro is run.


New Hampshire Department of Transportation
PO Box 483  |  7 Hazen Drive  |  
Concord, NH  |  03302-0483
Tel: 603.271.3734  |  Fax: 603.271.3914