Smaller text size Reset text size Larger text size
skip navigation
NHDOT Home CAD/D Home MicroStation MX v8i Downloads
CAD/D Home > MicroStation > Right-of-Way Front Sheet Notes

On Right-of-Way front sheets, there are a some notes to be added. Copies of these MicroStation cells can be found in the borders.cel file. Text within []'s is intended to be replaced with specific project data.

The first portion (Plan Intent and Notes) will go on every plan. This is cell FSRNT.

Then one of notes A through E will be added depending on how the right-of-way information was obtained. They are cells FSRNTA, FSRNTB, FSRNTAC, FSRNTD, FSRNTE.

PLAN INTENT

The purpose and intent of these plans is to document the property acquisitions for [City/Town, route number/street name and description, project name, project number], as required under RSA 230:32.

(Possible additional note: This plan also reestablishes and defines the existing highway boundaries in accordance with RSA 228.35.) (This note would only be as requested by the Bureau of ROW.)

NOTES

The coordinates listed are on the NH state plane system NAD 83 and are referenced to control stations Disk [disk1] and Disk [disk2]. The vertical elevations are on the NGVD 29 datum and are referenced to control stations Disk [disk3] and Disk [disk4]. Contact the NHDOT Survey Section at (603) 271-1600 for information on location and geodetic data.

No boundary survey has been conducted for the purpose of locating the property lines shown on this plan. The property lines shown on this plan are from tax map location, and other resources. The areas listed for the takes and remaining lands are estimations only. (This sentence could be adjusted in a specific exception regarding a licensed land surveyor. If this is required, it will be requested by the Bureau of ROW.)


And one of the following (as supplied from ROW):

  1. The existing highway alignment, right of way and easements shown on this plan were developed from record project XXXXX (on file at NHDOT records) (recorded plan #[plan number] at the County Registry of Deeds).
Or
  1. The existing right of way shown on this plan was developed using the original highway layout of [# of rods] rods, ([equivalent feet] feet) conducted [layout date] and recorded [record date] in Book [book #] Page [page #] of the City/Town of [City/Town] records and evidence of prescriptive use and occupation.
Or
  1. The existing right of way shown on this plan was developed from evidence or prescriptive use and occupation.
Or
  1. The existing highway alignment, right of way and easements shown on this plan were developed in part from record project XXXXX (on file at NHDOT records) (recorded plans #[plan number] at the County Registry of Deeds) and from using the original highway layout of [# of rods] rods, ([equivalent feet] feet) conducted [layout date] and recorded [record date] in Book [book #] Page [page #] of the City/Town of [City/Town] records and evidence of prescriptive use and occupation.
Or
  1. The existing highway alignment, right of way and easements shown on this plan were developed in part from record project XXXXX (on file at NHDOT records) (recorded plans #[plan number] at the County Registry of Deeds) and from using evidence of prescriptive use and occupation.




New Hampshire Department of Transportation
PO Box 483 | 7 Hazen Drive | Concord, NH | 03302-0483
Tel: 603.271.3734 | Fax: 603.271.3914

copyright 2014. State of New Hampshire