Smaller text size Reset text size Larger text size
skip navigation
NHDOT Home CAD/D Home MicroStation MX v8i Downloads
CAD/D Home > MX v8i > Adding Details to Cross Sections v8i

Adding Details to Cross Sections v8i
(XSDetail Add-In)

Features Stored

MX Cross Section Labels
Section Set Feature Name MX Label
0, 1 *available*  
2 Environment lines VB, VH, VO, VT, VZ, WD
3 Right-of-way lines  BC, BN, BP, BR, BS, BT
4, 5, 6, 7 *available*  
8, 9 Building sills BD
A, B *available*  
C Other Determined by user
D Design Design model
E Existing Ground Triangulation
F Subgrade  
G, H, I, N, O, P, Q, S, T, U, V *available*  
J Misc Section J  
K Misc Section K  
L Misc Section L  
M Misc Section M  
R Drainage Pipe XC ( * see table below)
W Detail Features  * see table below
X Old Ground Elevations OC
Y General  
Z Temporary Used by MX wizards
 

Cross-Section Detail Feature Strings

To provide detail features on cross-sections, an intermediate model is created with strings representing the details to be added. A set of cross sections (with string labels beginning with the letter W) are cut through this model. The MX labels of the strings in the intermediate model are shown in the following table.


Cross-Section Detail Feature Strings
MX Label Feature Name
X0, X1Coniferous & Deciduous Trees
X2Environment lines
X3Right-of-way lines
X4, X5Joint Pole
X6, X7Hydrant
X8, X9Building sills
XA, XBGuy Pole
XC, XDDrainage Pipes
XEDrainage Structure Sumps
XG, XHLight Pole
XI, XJJoint Pole with Light
XK, XLPower Pole with Light
XM, XNPole
XO, XPPower Pole
XQ, XRTelephone Pole
XSCatch Basin
XTDrop Inlet
XUDrainage Manhole
XVUtility Manholes

Related Pages

MX Add-In Index

Summary of CAD/D Cross-section Procedures





New Hampshire Department of Transportation
PO Box 483 | 7 Hazen Drive | Concord, NH | 03302-0483
Tel: 603.271.3734 | Fax: 603.271.3914

copyright 2014. State of New Hampshire