Smaller text size Reset text size Larger text size
skip navigation
NHDOT Home CAD/D Home MicroStation MX v8i OpenRoads Downloads
CAD/D Home > MX v8i > MX Surface Analysis (v8i)

MX Surface Analysis (v8i)

MX offers a handfull of surface analysis tools to aid in evaluating surface string models.   From the Analysis menu, select Surface Analysis...

  Model to Analyze panel

On the Model to Analyze panel, specify either a string or triangulation model to analyze:

  • If a triangulation model is selected (recommended model), then a triangulation string is also required.
  • If a string model is selected, then specify the appropriate masking for this model.  For surveyed ground models, use the GroundTriangle.msk.

Click Options... to adjust any of the defaults for Surface Analysis.  Select OK to return to the Model to Analyze panel.

Analysis within a Boundary is also available.  From the Model to Analyze panel, click Next to advance to the Surface Analysis panel.

The Surface Analysis panel

  Surface Analysis panel

The Surface Analysis panel is the entry to 10 surface analysis options, select from:

  1. Contours
  2. Elevation Bands
  3. Slope Bands
  4. Aspect Bands
  5. Flat Spots
  6. Steep Slopes
  7. Flow Arrows
  8. Simple Profile
  9. Display Triangulation  (Refer to MX Triangulation for triangle model generation)
  10. Catchment Areas

Similar to the Model to Analyze panel, click Options... to adjust any of the defaults for Surface Analysis.

Related Pages

MX Add-In Index

MX Wizard Index

MX Macro Index

MicroStation v8 Program Index

New Hampshire Department of Transportation
PO Box 483 | 7 Hazen Drive | Concord, NH | 03302-0483
Tel: 603.271.3734 | Fax: 603.271.3914

copyright 2014. State of New Hampshire