Smaller text size Reset text size Larger text size
skip navigation
NHDOT Home CAD/D Home MicroStation MX v8i Downloads
CAD/D Home > MX > NHDOT MX Training

Strictly for reference, the PowerPoint presentations that accompanied the In-House MX training from 2005 are available. Some of them have been updated to MX V8i although many have not. These presentations are not a substitute for actual MX training.

Videos were created with MX V8i during the summer and fall of 2012 and contain information that was current at the time. An update to Windows Media Player is needed to view the video files properly. If you have trouble playing a video, please see Bill Caswell for assistance.

Select a presentation from the following links:

Introducing the new road design technology from Bentley called OpenRoads.  It is the evolution of not only MX, but InRoads and GEOPAK.  Thus eliminating all communication barriers between road design softwares. The following videos are for the SS3 version of MX.

Also available are Demonstration Videos that have been recorded from the 2013 Bentley LEARNing Conference:

  • Horizontal Geometry Workshop,  (in Canadian)

    • 101 - Opening the Design Standards toolbar, Feature Toggle bar, Civil Message Center and Project Explorer

    • 102 - Import Geometry

    • 103 - Project Explorer Settings, Point tool w/ Key-In, Line Between Points and Set Feature Definition

    • 104 - Define Starting Station and Design File Settings/Civil formatting

    • 201 - Design Standards toolbar and Simple Arc From Element

    • 202 - Arc From Element

    • 203 - Line Between Arcs

    • 204 - Complex By Elements and Civil Message Center

    • 205 - Define Starting Station and Horizontal Geometry Report

    • 206 - Feature Definition Toggle Bar and Single Offset Entire Element

    • 207 - Single Offset Partial

    • 208 - Manipulator edit

    • 301 - Arc Between Elements

    • 302 - Arc Between Elements

    • 303 - Spiral Arc Spiral

    • 304 - 3 Center Arc

    • 401 - Arc Between Elements w/ Ratio Offset

    • 402 - Complex By PI and Set Feature Definition

    • 403- Taper Arc Taper

    • 501 - Line Between Points, Line To Element, Simple Arc and Variable Offset Taper

    • 502 - Reverse Transition

    • 503 - Reverse Curve By Radii Ratio

 

 

 





New Hampshire Department of Transportation
PO Box 483 | 7 Hazen Drive | Concord, NH | 03302-0483
Tel: 603.271.3734 | Fax: 603.271.3914

copyright 2014. State of New Hampshire