Smaller text size Reset text size Larger text size
skip navigation
NHDOT Home CAD/D Home MicroStation MX v8i Downloads
CAD/D Home > MX v8i > Flow Arrow Surface Analysis (v8i)

Flow Arrow Surface Analysis (v8i)

Found within Surface Analysis, MX provides a tool to define and draw surface flow arrows.

Flow Arrow panel

On the Flow Arrows panel, specify the Length and Color of the flow arrow symbol.  Select Next to view the results on the MX DisplayNext also advances you to the Surface Analysis Review panel.

Surface Analysis Review panel

At the bottom of the Surface Analysis Review panel are check boxes to Delete Analysis from the Display, and to Compress Model and Drawing Files.  Click <Back to return to the Flow Arrows panel, click Next> to return to Surface Analysis, or click Finish to end.


Rename Temporary Model panel

If a string model was used for this Surface Analysys, then you will be prompted to either Delete or Rename the temporary triangle model generated for this analysis.  Choose Delete and then click OK to end Surface Analysis.


Related Pages

The Surface Analysis panel is the entry to 10 surface analysis options:

  1. Contours
  2. Elevation Bands
  3. Slope Bands
  4. Aspect Bands
  5. Flat Spots
  6. Steep Slopes
  7. Flow Arrows
  8. Simple Profile
  9. Display Triangulation  (Refer to MX Triangulation for triangle model generation)
  10. Catchment Areas




New Hampshire Department of Transportation
PO Box 483 | 7 Hazen Drive | Concord, NH | 03302-0483
Tel: 603.271.3734 | Fax: 603.271.3914

copyright 2013. State of New Hampshire