Smaller text size Reset text size Larger text size
skip navigation
NHDOT Home CAD/D Home MicroStation MX v8i OpenRoads Downloads
CAD/D Home > MX v8i > MX Add-In Index v8i

MX Add-In Index v8i

MX Add-In List
CogoReport Use NHAliReport for a Cogo style report.
CONREPO Used to generate an output file of string points from a specified model.  This report is commonly used to provide 3 dimensional string information to non-MX consultants.
Data Import For importing GPS data into MX.
NHAlign Used to create an alignment drawing that can be transferred to MicroStation.  Improved to handle spiral curves.
NHAliReport Used to create a formatted report of an MX alignment.  This report can also be used to plot curve data on a MicroStation alignment.
NHDraper Used to add elevations to one or more strings in a model.
NHProfile Used to draw existing and proposed profiles. This is a replacement of the PrelProf UPM program.
NHSill Used to generate Building Sill strings.
PointScan Used to create a report of project features referenced by station and offset.
RenameM Discontinued. Use the menu command: Modify > Edit Strings > Modify Master / Geometry String Name Updated August 1, 2014
XSDetail Used to create section sets representing detail symbols plotted on cross-sections.

Installing an add-in

  • From MX's Add-Ins menu, select Personal Add-Ins, then Add-In Manager...  
  • Click the Add... button on the next panel.
  • Click the ellipse button button at the end of the line labeled .EXE File Name
  • Browse to the N:\cadd\cadd\mx v8i\add-ins directory
  • Select the desired program and Open
  • Click the OK button and Close the Add-In Manager
  • The program will now be available on your Personal Add-Ins menu

Related Pages

MX Macro Index

MX Wizard Index

MicroStation v8 Program Index

New Hampshire Department of Transportation
PO Box 483 | 7 Hazen Drive | Concord, NH | 03302-0483
Tel: 603.271.3734 | Fax: 603.271.3914

Copyright 2014. State of New Hampshire