Smaller text size Reset text size Larger text size
skip navigation
NHDOT Home CAD/D Home MicroStation MX v8i OpenRoads Downloads
CAD/D Home > MX v8i > Flat Spots (v8i)

Flat Spots (v8i)

Found within Surface Analysis, Mx provides a tool to identify model surface flat spots.

Flat Spots panel

On the Flat Spots panel, specify a Maximum Slope Value and a highlight Color.  Working off a triangulation of the Surface Model, all triangles having a slope less than the threshold slope will be highlighted in the specified Color.  Select Next to view the results and advance to the Surface Analysis Review panel.

Surface Analysis Review panel

At the bottom of the Surface Analysis Review panel are check boxes to Delete Analysis from the Display, and to Compress Model and Drawing Files.  Click <Back to return to the Flat Spots panel, click Next> to return to Surface Analysis, or click Finish to end.

Rename Temporary panel

If a string model was used for this Surface Analysys, then you will be prompted to either Delete or Rename the temporary triangle model generated for this analysis.  Choose Delete and then click OK to end Surface Analysis.

Related Pages

The Surface Analysis panel is the entry to 10 surface analysis options:

  1. Contours
  2. Elevation Bands
  3. Slope Bands
  4. Aspect Bands
  5. Flat Spots
  6. Steep Slopes
  7. Flow Arrows
  8. Simple Profile
  9. Display Triangulation  (Refer to MX Triangulation for triangle model generation)
  10. Catchment Areas

New Hampshire Department of Transportation
PO Box 483 | 7 Hazen Drive | Concord, NH | 03302-0483
Tel: 603.271.3734 | Fax: 603.271.3914

copyright 2014. State of New Hampshire