CAD/D Home > MX > MX Add-In Index
| CogoReport | Use NHAliReport for a Cogo style report. |
| CONREPO | Used to generate an output file of string points from a specified model. This report is commonly used to provide 3 dimensional string information to non-MX consultants. |
| Data Import | For importing GPS data into MX. |
| NHAlign | Used to create an alignment drawing that can be transferred to MicroStation. Improved to handle spiral curves. |
| NHAliReport | Used to create a formatted report of an MX alignment. This report can also be used to plot curve data on a MicroStation alignment. This is a modified version of the Maine DOT's DABAlign. |
| NHDraper | Used to add elevations to one or more strings in a model. This is a modified version of Infrasoft's String Draper program. |
| NHProfile | Used to draw existing and proposed profiles. This is a replacement of the PrelProf UPM program. |
| PointScan | Used to create a report of project features referenced by station and offset. |
| RenameM | Used to rename Master Alignment strings. It eliminates the need to address it's Sub-reference, the Geometry string, and it's Sub-reference. This add-in is very basic to operate |
| XSDetail | Used to create section sets representing detail symbols plotted on cross-sections. |
Installing an add-in
- From MX's Add-Ins menu, select Personal Add-Ins, then Add-In Manager...
- Click the Add... button on the next panel.
- Click the
button at the end of the line labeled .EXE File Name - Browse to the N:\cadd\cadd\mx\add-ins directory
- Select the desired program and Open
- Click the OK button and Close the Add-In Manager
- The program will now be available on your Personal Add-Ins menu
New Hampshire Department of Transportation
PO Box 483 | 7 Hazen Drive | Concord, NH | 03302-0483
Tel: 603.271.3734 | Fax: 603.271.3914