I1210P macro

Sample I1210P Macro Input File

MOSS
   Interface for alignment MCFM

   The · in the 031 option below represents a blank space

   This EDIT option will delete the existing interface strings for this alignment before the macro is run.

   The I·F· field will delete all strings beginning with "I" having a third character of "F". The "F" would be modified to match the third character of your master alignment

EDIT,PDESIGN MCFM
031,I·F·
999

AUTODRAW,ON

INTERFAC,PDESIGN MCFM SECTIONS,PDESIGN MCFM
900,I1210P
GSS=E,REFS=MCFM,RLT=F0,RRT=FI,STL=50140,STR=50140, FNR=50200,
FNL=50230
999

FINISH

Variables

Default values will be shown in red.
Required variables are shown in bold.

REFS	Reference string label
GSS	First character of existing ground sections
RLT, RRT	Last two characters of level datum string. The first character (F) will be the third character in your master alignment string. The second character will be a "0" (zero) for the left side and "I" (letter i) on the right.*
STL, STR	Start station left and right
FNL, FNR	End station left and right
R	Option to generate interface on right side R='' will interface right side R=000 will turn off interfacing for the right side
L	Option to generate interface on left side L='' will interface left side L=000 will turn off interfacing for the left side

* - Note that the datum string must exist in the model before the macro is run. It would be the string defining the top of slope (typically 0.3m/1' from the edge of pavement) and have an EH string label.

Back

CAD/D Homepage | MicroStation v8 Documentation
MX Documentation | NHDOT File Library