|
From the Reference Details panel, supply
the Design Model and the Reference String Name. The
Next button
will advance to the Road Profile panel.
From the bottom of the Road Profile
panel, insure the Path is set to "Public Styles".
Select a curb
strategy by clicking on one of the displayed templates. A
curb strategy may also be selected from one of
the available Descriptions, or one of the available File Names
found on the bottom of this panel.
The "NH" templates are compiled
to design manual standards. These templates are intended to
be used
with Roadway Edge (CE) strings. The "ES" versions are
intended to be used with Shoulder Edge (ES) strings. These templates have been
designed to eliminate coincident strings
at the pavement edges. Besides having less design strings to
manage, future edits made with the Cross Sectional Editor will be less
painful.
If curbs
are to be generated from shoulder strings, then be sure that the
shoulders adhere to the curbed shoulder standard, refer to Shoulder Design in
MX-Curbed for the design of shoulders in curbed regions.
Specify which Side of road is to receive this curb application. The
Next button
will advance to the Edge Strings panel.
Specify the edge(s) of pavement from which
the curbs are to be generated from. MX will seed the design's
Roadway Edge (CE) strings by default. The Next button will advance
to the Start and End panel.
Specify the Start and End station of this
curb application. The Next button will generate the strings
described in the selected template and advance to the Create Another
Length panel.
From this point, one may create another
length with a different template, create another length with the same
template, or Finish to exit the wizard.
Contact the Cad/d staff for any Curb and
Sidewalk template additions or modifications.
|
