Setz.ma   (Key in: mdl load setz)

Setz is an mdl application designed to change an elevation of a single element
or all the elements on the active drawing. (LRBC - 8/22/03)

Directions for use:

Load setz.ma:
1. Utilities>Mdl Applications.  The Mdl Application window opens.
2. In the Available Applications list box, highlight setz.
3. Click Load.
4. In the Loaded Applications window of the MDL Application window highlight Setz.
5. Click the Key-ins button.
6. In the Key_in window double click on Setz.
The dialog will say ELEVATION: (0:0:0) which stands for "master-units:sub-units:sub-subunits"
7. Type the desired elevation after (0:0:0) press enter [for examaple: by typing 100 the 
   dialgog will read ELEVATION will read (100:0:0)].

To change all elements to one elevation:
1. Click on "all" in the second column under the Key-in line.
2. "Setz all" will appear next to the (x:0:0).  Press Return.
Check the dialog in the Status Bar to confirm "Set Z Value of All Elements>Accept/Reject".
3. Hit the screen in the view to Accept the elevation change.

To change single element(s):
1. Click on "single" in the second column under the Key-in line.
2. "Setz single" will appear next to the (x:0:0).  Press Return.
Check the dialog in the Status Bar to confirm "Set Z Value of Single Element>Identify element".
3. Click on the element(s)screen in the view to Accept the elevation change.  You can change 
the elevation in the Key-in window on the fly between selecting elements.